container traffic for ZSA Motor Engine Oil Recycling Machine, Used Oil Regeneration Plant
chongqing or shanghai
1 - 3
To be negotiated
ZSA Motor Engine Oil Recycling Machine, Used Oil Regeneration Plant
overview:This Motor Engine Oil Recycling Machine, Used Oil Regeneration Plant can treat a variety of waste lube oil ,get high quality base oil and a small amount of gasoline and diesel through vacuum distillation.after pretreatment,waste oil pumped into the distillationKettle,heat to working temperature,can get the base oil ,gasoline and diesel we required.
When reaction complete,stop heating,remove residue from the bottom of the tank,then the machine can be used again.the production cost is low,and the base oil is high quality.this is the most advanced technology in the world in the waste oil recycling line,and suitable for large-scale industrial production.
Systems of equipment
Base oil:85%~88%(index same as SN150~SN200)
Gasoline :about 3%
Index of oil after treatment
Light base oil
Medium/heavy base oil
Flash point open
1 widely usage: can treat gasoline engine oil, diesel engine oil, rubber oil, waste oils and other various cleaning oil
2the total cost of processing one ton used oil only USD30(including fuel, electricity and pretreatment agent)
3 high recovery rate: base oil:85%~88%,gasoline 3%,diesel:3%~4%,oil residue:6%~8%
Current the continuous operation practices in the market, while the good oil come out, at the same time pump waste oil in. This operation is complicated,labor-intensive,and a lot of good oil will be pumped as residue oil , the yield at most up to 72% ,too much residue oil.
4 Do not need acid and clay, get high quality base oil : No unsaturated composition, can storage in a long-term without change its color, also no any bad smell.
5 environmental protection: the whole process is all sealed, won’t release any gas harmful to human and environment, the colloid and asphalting, carbon black in the waste lube oil are all into sludge, can be used as asphalt or fuel.
6 this Motor Engine Oil Recycling Machine, Used Oil Regeneration Plant use a special way heating, high thermal efficiency, and difficult to form carbon fouling.safe,reliable,durable.this is the most advanced technology in the world and suitable for large-scale industrial production.
7 easy operation, low labor intensity, only 1 to 2 workers can easily operate the machine.
8 without the use of heat-conduction oil furnace, the heat-conduction oil furnace heating temperature can’t meet the technical requirements, oil yield only 65%,and need regular maintenance; without the use of special high temperature resistant oil pump, the pump is very expensive and is easily broken, continuous operation mode need to frequently replace this pump; without the use of salt furnace heating, the temperature is too high, extremely unsafe; electric heating can’t meet the technical requirements
Packaging & Shipping
1 what kind of raw material the ZSA machine can treat
ZSA machine can treat all kinds of waste lubricant oil,motor oil,car engine oil.these kind of oil can be mixed.
2 what kind of final product we can get
main product is base oil,a little gasoline and diesel
3 how about the oil yield
in normal industrial production,can get at least 85% base oil.this can be assured
4 how to heat the ZSA Motor Engine Oil Recycling Machine, Used Oil Regeneration Plant
can use fuel oil or gas to heat,environmental friendly,don't suggest use coal.not good for environment
5 need any other special chemical in the processing
just need the pretreatment chemical.this chemical customer can buy from local market.don't need other chemical.don't need acid and clay.
6 what kind of equipment need customer prepare?
customer just prepare the good oil and waste oil tanks,a water pool and power supply
7 how to install the ZSA machine
engineer will at site for installaton and commissioning,till customer can use smoothly
9need how many workers to operate the machine,need any special technologist?
2 workers can easily operte the plant,don't need special technologist
10 about how long can deliver the machine
according to different capacity,usually 30~50 working days can deliver the machine
Chongqing Junneng Machine Manufacturing Co., ltd. is a professional manufacturer engaged in the research, development, production, sale and service of waste oil recycling machine and all kinds of oil purifier .we have Passed ISO & CE certification.10 Years Gold Supplier in Alibaba.